The Allflex LPR will only connect to iLivestock via an iOS device.
Allflex LPR Pairing settings
The LPR can be tricky to pair at times, and the setup involves 2 stages: one for the reader and one for your phone or tablet.
How to Pair the Allflex LPR to iLivestock
On the EID reader
Step 1. Switch the EID reader on by pressing and releasing the "scan" button. You should see a red light, and it should beep once.
Step 2. Ensure the reader doesn't turn off whilst trying to pair. - Automatic shutdown is usually after 2 minutes on this reader.
On the phone or tablet
Step 1. Make sure your Bluetooth on the iOS device is switched on.
Step 2. Below this, you should see the device "LPR" show as available.
Step 3. Select LPR and add the pin 1234 if requested, as shown in screen grabs below.
Step 4. The LPR should now show under your Paired Devices on your Bluetooth screen.
Step 5. Open iLivestock, and open Equipment and you should see the LPR listed and a green arrow showing it is connected.
Having Issues with Reading EID Tags?
If you can connect to your LPR but cannot get EID tags to read into iLivestock, please make sure your device is in Master mode, not Slave.
