The iLivestock eWeigh is easy to use and works seamlessly with iLivestock software and hardware. The eWeigh can also be used with with other EID readers and weigh bars via the iLivestock app.
eWeigh Functions
Turning on your eWeigh
Press and hold down the 'On / Off' button to turn on the eWeigh. Once turned on the 'On / Off' light Indicator will flash red.
Bluetooth is permanently on when the eWeigh is turned on.
Connecting your eWeigh to Weigh Bars
Screw in the left and right weigh bar cables to the corresponding cable connectors on the eWeigh.
You can work with both cables connected or just one, depending on your setup.
You can select the weigh bars you are using when the eWeigh is connected in the iLivestock app.
Charging your eWeigh
Your eWeigh will come with a plug and cable to charge from the mains.
Connect the cable to the plug, then screw the charger cable to the Power Cable Connector found at the bottom centre of the eWeigh.
Once plugged in to charge, the External Power Connected light indicator will go red. The eWeigh can also be used whilst charging.
Turning off your eWeigh
To turn off the eWeigh press and hold the On/Off button until the red ON light goes off.