Skip to content
English - United Kingdom
  • There are no suggestions because the search field is empty.

eWeighCrate by Rappa and iLivestock Set Up

How to get started with your crate once its been delivered

See our video and step by step guide on how to assemble the eWeighCrate by Rappa and iLivestock from unboxing to fully assembled. 

 

How to assemble the eWeighCrate Step by Step


Step 1: Find and slot in the Rear Entry Gate.

Step 2: Secure the Rear Entry Gate with a Linch pin.

Step 3: Find and slot in the Front Exit Gate

Step 4: Secure with a Linch pin.

Step 5: Find and slot in the Rear Gate Handle.

Step 6: Secure with the Bar Linch pin x 2 - one at each end.

Unscrew Yellow Arm Lock.

Adjust Arm Handle and re-screw the Yellow Arm Lock.

Step 7: Find and unscrew the Yellow Arm Lock, adjust the arm, and re-screw in the Yellow Arm Lock so it attaches the Rear Gate Handle to the gate.

Step 8: Find and slot in the T-Bar Mount.

Step 9: Find and secure the Tablet Mount to the T-Bar Mount (make sure you have put the tablet into the tablet mount beforehand).

Step 10: Find and secure the eWeigh to the T-Bar Mount using the flexible velcro strips.

Connect eWeighBar 1 to eWeigh

Connect eWeighBar 2 to eWeigh.

Step 11: Connect your eWeighBar Wires 1 and 2 to the eWeigh.

Step 12: You are now ready to start weighing.

See our videos on using the eWeighCrate

 

The Complete Sheep Management System